Need to use ADSL network connection to access the Internet today has become common for all people, usually the service provider only supports a computer network connection with an ADSL line that only.

This article will guide the way the Internet connection sharing for multiple computers share a network connection ADSL.

Method 1:

Using Modem (Router) has a port (Port) and a USB port RJ45, the only connection is up to two computers. Machine located near Modem, Router will use the USB connection also the remote host uses RJ45 connections.

Method 2:

Using Modem (Router) has four ports (Port) RJ45, how to connect a maximum of 4 computers. Each computer will connect to an RJ45 port on the modem (router) via cable network.

Method 3:

Using Modem (Router) has a port (Port) RJ45 and share with Hub (Switch), this way is very much connected computer. Hub (Switch) is connected to the modem (router) via RJ45, the computer will connect to the rest of the RJ45 port Hub (Switch) through cable.

Depending on the number of computers that select the Hub (Switch) with the appropriate number of RJ45 ports, they can cooperate more Hub (Switch) together to increase the port number to connect.
Note:

Each computer must be attached network equipment (Ethernet on-board or Ethernet Card).
Can use the IP address of the machine defaults to automatic (Auto) or set arbitrary IP addresses (See the instructions Networking two computers in Windows XP).

Cable to connect the computer to the Hub (Switch), Modem (Router) is click straight RJ45 cable (see instructions Pressing the RJ45 cable to connect to the computer network).

All computers on the network can share resources with each other (See the instructions Share resources shared on the network).